A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Subaru 27536AJ002 06210216394
Vendors's code: 27536AJ002
Product code: 06210958253
Barcode:
Code 39:
ISBN:
569,11 zł
Price
569,11 zł
700,00 zł
Price
700,00 zł
In stock
Ask about the product
ABS pump and control module Subaru 27536AJ002 06210216394
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Subaru?
This is a used, working ABS pump with control module for the Subaru - numbers 27536AJ002; 06.2102-1639.4 / 06210216394. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Subaru
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Subaru. Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 27536AJ002 - part number (OEM)
- 06.2102-1639.4 / 06210216394 - ABS pump number (ATE)
- 06.2109-5825.3 / 06210958253 - ABS control module number (ATE)
Application according to the listing
- Subaru - model
- ATE - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Can a pump with a different number fit as well? |
| Sometimes yes, but we do not assume that listings are interchangeable. Compare all the numbers with the label on your pump or ask us. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
