A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Suzuki Splash 86L0 DE / 06210215854 06210957783
Vendors's code: 06210215854
Product code: 06210957783
Barcode:
Code 39:
ISBN:
$289.47
Price
$289.47
$356.04
Price
$356.04
Ask about the product
ABS pump and control module Suzuki Splash 86L0 DE / 06210215854 06210957783
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.52
-
shipping
(Poland)
from
$30.52
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Suzuki?
This is a used, working ABS pump with control module for the Suzuki - numbers 06.2102-1585.4 / 06210215854; 06.2109-5778.3 / 06210957783. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Suzuki
This ABS pump with control module is intended for: Suzuki. It is a used, working part in good technical condition.
Numbers to compare
- 06.2102-1585.4 / 06210215854 - ABS pump number (ATE)
- 06.2109-5778.3 / 06210957783 - ABS control module number (ATE)
Application according to the listing
- Suzuki - model
- ATE - manufacturer
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
