A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Suzuki SX4 S-Cross 5611061MA0 0265243263
Vendors's code: 5611061MA0
Product code: 0265243263
Barcode:
Code 39:
ISBN:
1 951,22 zł
Price
1 951,22 zł
2 400,00 zł
Price
2 400,00 zł
Ask about the product
ABS pump and control module Suzuki SX4 S-Cross 5611061MA0 0265243263
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Suzuki?
This is a used, working ABS pump with control module for the Suzuki - numbers 56110-61MA0 / 5611061MA0; 0265243263. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Suzuki
An ABS pump with control module is one of the key active safety components. This listing applies to: Suzuki; the part is used, working and in good condition.
Numbers to compare
- 56110-61MA0 / 5611061MA0 - part number (OEM)
- 0265243263 - ABS pump number (Bosch)
- 0265956193 - ABS control module number (Bosch)
Application according to the listing
- Suzuki - model
- Bosch - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
Customers Also Viewed
-
Price 1 200,00 złPrice 975,61 zł
