A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Suzuki 84E0 BE 2WD / 06210206484
Vendors's code: 84E0BE2WD
Product code: 06210908063
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Suzuki 84E0 BE 2WD / 06210206484
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.79
-
shipping
(Poland)
from
£22.79
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Suzuki?
This is a used, working ABS pump with control module for the Suzuki - numbers 84E0 BE 2WD / 84E0BE2WD; 06.2102-0648.4 / 06210206484. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Suzuki
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Suzuki. Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 84E0 BE 2WD / 84E0BE2WD - part number (OEM)
- 06.2102-0648.4 / 06210206484 - ABS pump number (ATE)
- 06.2109-0806.3 / 06210908063 - ABS control module number (ATE)
Application according to the listing
- Suzuki - model
- ATE - manufacturer
How an ABS pump with control module works
During normal driving the system is passive and the brakes work conventionally. Only under hard braking does the pump start to pulse, and you can feel vibrations in the brake pedal.
Matching
The number 84E0 BE 2WD also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
Customers Also Viewed
-
Price £113.97Price £92.66
-
Price £75.98Price £61.77
