A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Suzuki Ignis 86G0 BE 2WD / 06210200704
Vendors's code: 86G0BE2WD
Product code: 06210901463
Barcode:
Code 39:
ISBN:
£139.03
Price
£139.03
£171.01
Price
£171.01
In stock
Ask about the product
ABS pump and control module Suzuki Ignis 86G0 BE 2WD / 06210200704
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.80
-
shipping
(Poland)
from
£22.80
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number 86G0BE2WD - is this the right part?
This is a used, working ABS pump with control module for the Suzuki Ignis - numbers 86G0 BE 2WD / 86G0BE2WD; 06.2102-0070.4 / 06210200704. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Suzuki Ignis
When the ABS in the Suzuki Ignis stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 86G0 BE 2WD / 86G0BE2WD - part number (OEM)
- 06.2102-0070.4 / 06210200704 - ABS pump number (ATE)
- 06.2109-0146.3 / 06210901463 - ABS control module number (ATE)
Application according to the listing
- Suzuki Ignis - model
- ATE - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
The number 86G0 BE 2WD also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
