A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Suzuki Swift 62J0 BE 2WD / 06210201784
Vendors's code: 62J0BE2WD
Product code: 06210904343
Barcode:
Code 39:
ISBN:
$248.11
Price
$248.11
$305.18
Price
$305.18
In stock
Ask about the product
ABS pump and control module Suzuki Swift 62J0 BE 2WD / 06210201784
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.52
-
shipping
(Poland)
from
$30.52
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Suzuki Swift?
This is a used, working ABS pump with control module for the Suzuki Swift - numbers 62J0 BE 2WD / 62J0BE2WD; 06.2102-0178.4 / 06210201784. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Suzuki Swift
According to the listing, this hydraulic unit with electronics fits the Suzuki Swift. It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- 62J0 BE 2WD / 62J0BE2WD - part number (OEM)
- 06.2102-0178.4 / 06210201784 - ABS pump number (ATE)
- 06.2109-0434.3 / 06210904343 - ABS control module number (ATE)
Application according to the listing
- Suzuki Swift - model
- ATE - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
Inspect the control module connector: corrosion or burnt contacts cause symptoms similar to faulty electronics.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
