A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Toyota Land Cruiser 4451060070 8954160040
Vendors's code: 4451060070
Product code: 8954160040
Barcode:
Code 39:
ISBN:
€243.90
Price
€243.90
€300.00
Price
€300.00
In stock
Ask about the product
ABS pump and control module Toyota Land Cruiser 4451060070 8954160040
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Toyota Land Cruiser?
This is a used, working ABS pump with control module for the Toyota Land Cruiser - numbers 44510-60070 / 4451060070; 89541-60040 / 8954160040. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Toyota Land Cruiser
This ABS pump with control module is intended for: Toyota Land Cruiser. It is a used, working part in good technical condition.
Numbers to compare
- 44510-60070 / 4451060070 - part number (OEM)
- 89541-60040 / 8954160040 - part number (OEM)
Application according to the listing
- Toyota Land Cruiser - model
How an ABS pump with control module works
During normal driving the system is passive and the brakes work conventionally. Only under hard braking does the pump start to pulse, and you can feel vibrations in the brake pedal.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
