A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Toyota Yaris Verso 8954152230
Vendors's code: 8954152230
Product code: abs_8954152230
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Toyota Yaris Verso 8954152230
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Toyota Yaris Verso?
This is a used, working ABS pump with control module for the Toyota Yaris Verso - numbers 89541-52230 / 8954152230. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Toyota Yaris Verso
A used ABS pump is a way to repair the braking system without buying a new, expensive part. This listing applies to: Toyota Yaris Verso (2003-2006); the unit is working and in good condition.
Numbers to compare
- 89541-52230 / 8954152230 - part number (OEM)
Application according to the listing
- Toyota Yaris Verso - model
- 2003-2006 - year
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
Compare number 89541-52230 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model and year alone. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- ABS does not react to wheel slip,
- ESP or ASR does not switch on,
- power supply faults in the diagnostic memory,
- signs of corrosion are visible on the connector.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
