A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volkswagen 3Q0614517AC 10022100464
Vendors's code: 3Q0907379AC
Product code: 10022100464
Barcode:
Code 39:
ISBN:
975,61 zł
Price
975,61 zł
1 200,00 zł
Price
1 200,00 zł
Ask about the product
ABS pump and control module Volkswagen 3Q0614517AC 10022100464
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Volkswagen?
This is a used, working ABS pump with control module for the Volkswagen - numbers 3Q0614517AC; 3Q0907379AC. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volkswagen
An ABS pump with control module is one of the key active safety components. This listing applies to: Volkswagen; the part is used, working and in good condition.
Numbers to compare
- 3Q0614517AC - part number (OEM)
- 3Q0907379AC - part number (OEM)
- 10.0221-0046.4 / 10022100464 - ABS pump number (ATE)
Application according to the listing
- Volkswagen - model
- ATE - manufacturer
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
The number 3Q0614517AC also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
Customers Also Viewed
-
Price 1 200,00 złPrice 975,61 zł
