A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volkswagen Amarok 2H6614517B 2H6907379A
Vendors's code: 2H6907379A
Product code: 2H6614517B
Barcode:
Code 39:
ISBN:
1 951,22 zł
Price
1 951,22 zł
2 400,00 zł
Price
2 400,00 zł
In stock
Ask about the product
ABS pump and control module Volkswagen Amarok 2H6614517B 2H6907379A
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Volkswagen Amarok - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Volkswagen Amarok - numbers 2H6614517B; 2H6907379A. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volkswagen Amarok
If the ABS warning light is on in your Volkswagen Amarok or the brake system reports faults, the pump with control module may be the cause. We sell a used, working unit in good condition.
Numbers to compare
- 2H6614517B - part number (OEM)
- 2H6907379A - part number (OEM)
Application according to the listing
- Volkswagen Amarok - model
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
Compare number 2H6614517B in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
