A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volkswagen Audi Seat Skoda 1K0614517BB 1K0907379AM
Vendors's code: 1K0614517BB
Product code: 504A-8037C
Barcode:
Code 39:
ISBN:
$415.89
Price
$415.89
$511.55
Price
$511.55
Ask about the product
ABS pump and control module Volkswagen Audi Seat Skoda 1K0614517BB 1K0907379AM
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Volkswagen Audi Seat Skoda - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Volkswagen Audi Seat Skoda - numbers 1K0614517BB; 1K0907379AM. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volkswagen Audi Seat Skoda
Looking for a replacement for a faulty ABS pump for the Volkswagen Audi Seat Skoda? We offer a used, working unit with electronics in good condition.
Numbers to compare
- 1K0614517BB - part number (OEM)
- 1K0907379AM - part number (OEM)
- 10.0961-0318.3 / 10096103183 - ABS control module number (ATE)
Application according to the listing
- Volkswagen Audi Seat Skoda - model
- ATE - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
Compare number 1K0614517BB in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
