A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volkswagen Fox Polo 5Z0614117B 0265231626
Vendors's code: 0265800468
Product code: 5Z0614117B
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Volkswagen Fox Polo?
This is a used, working ABS pump with control module for the Volkswagen Fox Polo - numbers 5Z0 614 117 B / 5Z0614117B; 0 265 231 626 / 0265231626. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volkswagen Fox Polo
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Volkswagen Fox Polo (1999-2006); it is used, working and in good condition.
Numbers to compare
- 5Z0 614 117 B / 5Z0614117B - part number (OEM)
- 0 265 231 626 / 0265231626 - ABS pump number (Bosch)
- 0 265 800 468 / 0265800468 - ABS control module number (Bosch)
Application according to the listing
- Volkswagen Fox Polo - model
- 1999-2006 - year
- Bosch - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
Compare number 5Z0 614 117 B in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model and year alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.