A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volkswagen Seat Skoda 5Q0614517CP 10022012384
Vendors's code: 5Q0614517CP
Product code: 10022012384
Barcode:
Code 39:
ISBN:
1 300,81 zł
Price
1 300,81 zł
1 600,00 zł
Price
1 600,00 zł
In stock
Ask about the product
ABS pump and control module Volkswagen Seat Skoda 5Q0614517CP 10022012384
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Volkswagen Seat Skoda?
This is a used, working ABS pump with control module for the Volkswagen Seat Skoda - numbers 5Q0614517CP; 10.0220-1238.4 / 10022012384. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volkswagen Seat Skoda
Looking for a replacement for a faulty ABS pump for the Volkswagen Seat Skoda? We offer a used, working unit with electronics in good condition.
Numbers to compare
- 5Q0614517CP - part number (OEM)
- 10.0220-1238.4 / 10022012384 - ABS pump number (ATE)
Application according to the listing
- Volkswagen Seat Skoda - model
- ATE - manufacturer
How an ABS pump with control module works
The hydraulic unit contains solenoid valves and a return pump motor. When the control module detects a wheel locking, the valves briefly reduce the pressure in its circuit and the pump returns the fluid, so the driver keeps control of the car's path.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The ABS pump is part of the safety system, so it is worth comparing the numbers carefully before buying. A mismatched version may not work with the car's sensors or wiring.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
