A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volkswagen Seat Skoda 6C0614517S 6C0907379S
Vendors's code: 6C0907379S
Product code: 6C0614517S
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
400,00 zł
Price
400,00 zł
In stock
Ask about the product
ABS pump and control module Volkswagen Seat Skoda 6C0614517S 6C0907379S
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Volkswagen Seat Skoda - what to check before buying?
This is a used, working ABS pump with control module for the Volkswagen Seat Skoda - numbers 6C0614517S; 6C0907379S. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volkswagen Seat Skoda
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Volkswagen Seat Skoda; it is used, working and in good condition.
Numbers to compare
- 6C0614517S - part number (OEM)
- 6C0907379S - part number (OEM)
- 0265257677 - ABS pump number (Bosch)
- 0265956084 - ABS control module number (Bosch)
Application according to the listing
- Volkswagen Seat Skoda - model
- Bosch - manufacturer
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
