A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volkswagen Skoda 5WA614517BL 10091803823
Vendors's code: 5WA614517BL
Product code: 154C-59980
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number 5WA614517BL - is this the right part?
This is a used, working ABS pump with control module for the Volkswagen Skoda - numbers 5WA614517BL; 10.0918-0382.3 / 10091803823. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volkswagen Skoda
In the Volkswagen Skoda, the hydraulic unit with control module decides when and how much to reduce the pressure in the brakes of individual wheels. We sell a used, working unit in good condition.
Numbers to compare
- 5WA614517BL - part number (OEM)
- 10.0918-0382.3 / 10091803823 - ABS control module number (ATE)
Application according to the listing
- Volkswagen Skoda - model
- ATE - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.