A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volkswagen Transporter 7H0614111E 7H0907379E
Vendors's code: 7H0614111E
Product code: 7H0614111E
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Volkswagen Transporter?
This is a used, working ABS pump with control module for the Volkswagen Transporter - numbers 7H0 614 111 E / 7H0614111E; 7H0 907 379 E / 7H0907379E. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volkswagen Transporter
This ABS pump with control module is intended for: Volkswagen Transporter. It is a used, working part in good technical condition.
Numbers to compare
- 7H0 614 111 E / 7H0614111E - part number (OEM)
- 7H0 907 379 E / 7H0907379E - part number (OEM)
- 10.0204-0312.4 / 10020403124 - ABS pump number (ATE)
- 10.0925-0318.3 / 10092503183 - ABS control module number (ATE)
Application according to the listing
- Volkswagen Transporter - model
- ATE - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.