A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volkswagen Up 1S0614517C 17677010
Vendors's code: 1S0614517C
Product code: 54086076B
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Volkswagen Up 1S0614517C 17677010
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.79
-
shipping
(Poland)
from
£22.79
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Volkswagen Up?
This is a used, working ABS pump with control module for the Volkswagen Up - numbers 1S0 614 517 C / 1S0614517C; 17677010. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volkswagen Up
If the ABS warning light is on in your Volkswagen Up (2012) or the brake system reports faults, the pump with control module may be the cause. We sell a used, working unit in good condition.
Numbers to compare
- 1S0 614 517 C / 1S0614517C - part number (OEM)
- 17677010 - part number (OEM)
- 54086076B - part number (OEM)
- 17677210-B / 17677210B - part number (OEM)
Application according to the listing
- Volkswagen Up - model
- 2012 - year
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
Compare number 1S0 614 517 C in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model and year alone. Car versions differ in, among other things, ESP, brake type and engine. Compare the numbers with your pump or with the vehicle documents.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
