A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volvo 9140254B 9140254
Vendors's code: 9140254B
Product code: 9140773
Barcode:
Code 39:
ISBN:
£215.83
Price
£215.83
£265.47
Price
£265.47
In stock
Ask about the product
ABS pump and control module Volvo 9140254B 9140254
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the pump with control module 9140254B fit your car?
This is a used, working ABS pump with control module for the Volvo - numbers 9140254B; 9140254. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volvo
An ABS pump with control module is one of the key active safety components. This listing applies to: Volvo; the part is used, working and in good condition.
Numbers to compare
- 9140254B - part number (OEM)
- 9140254 - part number (OEM)
- 9140773 - part number (OEM)
Application according to the listing
- Volvo - model
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
It is worth reading the fault codes with a diagnostic tool first, because some ABS faults come from wheel sensors or wiring, not from the hydraulic unit itself.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
