A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volvo P31400644 10096104223
Vendors's code: P31400644
Product code: 10096104223
Barcode:
Code 39:
ISBN:
731,71 zł
Price
731,71 zł
900,00 zł
Price
900,00 zł
In stock
Ask about the product
ABS pump and control module Volvo P31400644 10096104223
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Volvo - what to check before buying?
This is a used, working ABS pump with control module for the Volvo - numbers P31400644; 10096104223. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volvo
An ABS pump with control module is one of the key active safety components. This listing applies to: Volvo; the part is used, working and in good condition.
Numbers to compare
- P31400644 - part number (OEM)
- 10096104223 - ABS control module number (ATE)
Application according to the listing
- Volvo - model
- ATE - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
