A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volvo V70 XC70 8619540 8619541
Vendors's code: 8619540
Product code: 8619541
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump number 8619540 - is this the right part?
This is a used, working ABS pump with control module for the Volvo V70 XC70 - numbers 8619540; 8619541. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volvo V70 XC70
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Volvo V70 XC70; it is used, working and in good condition.
Numbers to compare
- 8619540 - part number (OEM)
- 8619541 - part number (OEM)
- 10.0204-0332.4 / 10020403324 - ABS pump number (ATE)
- 10.0949-0425.3 / 10094904253 - ABS control module number (ATE)
Application according to the listing
- Volvo V70 XC70 - model
- ATE - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
Compare number 8619540 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.