A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Volkswagen Seat Skoda ATE 6X0614117 6X0907379B 10020401904 10094903483
Vendors's code: 6X0614117
Product code: 10020401904
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ABS pump 6X0614117 come complete with the control unit?
Used ABS pump with control unit, number 6X0614117, inspected before sale. Matched by the numbers on the block and sticker.
Is ABS pump 6X0614117 the right part for your Volkswagen?
The hydraulic block and control unit of this ABS pump form a single module that works with the wheel speed sensors in Volkswagen Seat Skoda cars. You will find number 6X0614117 on the label, and the full set of numbers is given in the description below. According to the listing, the pump comes from the Volkswagen Seat Skoda model.
Part number 6X0614117 and related numbers
You will find the numbers on the labels, while catalogues list them as a single string:
- 6X0614117, original Volkswagen number,
- 6X0907379B, Volkswagen control unit number,
- 10.0204-0190.4 (catalogue format: 10020401904), hydraulic block manufacturer's number,
- 10.0949-0348.3 (catalogue format: 10094903483), control unit number.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
When an ABS module needs replacing
- the brake pedal pulses or feels uneven for no obvious reason,
- the pump motor switches on at unusual moments or runs louder than usual,
- the ABS activates for no reason during normal braking,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| What is the difference between numbers 6X0614117 and 6X0907379B? |
|---|
| The module carries several numbers, because it is identified both by the car brand and by the manufacturer of the block and control unit. When matching the part, compare all the numbers. |
| Are the pump and the control unit sold separately? |
| In this listing they are a single module: a hydraulic block with the pump and valves, with the control unit attached to it. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| What condition is this pump in? |
| It is a used original part, inspected before sale. You will find the warranty period in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.