A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Daihatsu Mira Sumitomo 41610BZ010 7227C0180 DHT2WD72261
Vendors's code: 7227C0180
Product code: 41610BZ010
Barcode:
Code 39:
ISBN:
$123.41
Price
$123.41
$151.80
Price
$151.80
Ask about the product
ABS pump Daihatsu Mira Sumitomo 41610BZ010 7227C0180 DHT2WD72261
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.36
-
shipping
(Poland)
from
$30.36
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Where to find the number 41610BZ010 on a Daihatsu Mira ABS pump?
Used ABS pump with the numbers 41610BZ010 and 7227C0180 and the Sumitomo control unit DHT2WD72261. According to the listing data, it comes from a 2006 Daihatsu Mira 1.0. Compare the numbers with the original.
ABS pump Daihatsu Mira Sumitomo 41610BZ010 7227C0180 with control unit DHT2WD72261
When the ABS warning light is on in a Daihatsu Mira and the system does not protect the wheels from locking up, the cause can be the hydraulic block or the control unit. According to the listing data, this used ABS pump comes from a 2006 Daihatsu Mira 1.0. The control unit has a sticker with the code DHT-2WD-7226-1 and the lettering Sumitomo Electric.
Part numbers and where to find them on the housing
The numbers from the listing, as written on the labels and in compact form:
- 41610 BZ010 (compact: 41610BZ010), the OEM number,
- 7227 C0180 (compact: 7227C0180), the pump number,
- DHT-2WD-7226-1 (compact: DHT2WD72261), the number from the control unit sticker.
You can recognise the control unit by the Sumitomo Electric lettering on the black housing. You can read the block numbers from the aluminium hydraulic body.
When an ABS module needs replacing
These are the symptoms that most often lead to replacing a module like this:
- the ABS warning light permanently on,
- a hydraulic or pump motor fault stored in the control unit memory,
- the ABS does not engage, or engages for no reason during normal braking,
- the brake pedal feels uneven.
Before you decide, check the wheel speed sensors and the wiring. Only a fault code pointing to the module justifies replacing the pump.
FAQ
| Where do I find the number 41610BZ010 on my pump? |
|---|
| The numbers are on the aluminium hydraulic block, and the control unit has a separate sticker with the code DHT-2WD-7226-1. |
| Does this pump fit every Mira? |
| No. According to the listing data it comes from a 2006 Mira 1.0. Other years and engines may have different modules, so compare the numbers. |
| What does the Sumitomo Electric lettering on the control unit mean? |
| It is the manufacturer of the control unit electronics. It does not change the part numbers you use to choose the module. |
| What condition is this pump in? |
| It is a used, original part, checked before sale. You will find the warranty period in the product features table. |
Not sure about compatibility? Send us a photo of the numbers on your ABS pump, and we will check whether this module will fit your Mira.
