A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Hyundai Kia Mando 58900A7210 58920A7210 A758920550
Vendors's code: 58900-A7210
Product code: 58900A7210
Barcode:
Code 39:
ISBN:
£184.53
Price
£184.53
£226.98
Price
£226.98
Ask about the product
ABS pump Hyundai Kia Mando 58900A7210 58920A7210 A758920550
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.70
-
shipping
(Poland)
from
£22.70
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Where to find number 58900A7210 on Hyundai ABS pumps
Used original ABS module with number 58900A7210 for Hyundai Kia. Confirm compatibility with the number from your original pump.
Used Hyundai Kia ABS pump with number 58900A7210
The hydraulic block and control unit of this ABS pump form a single module that works with the wheel speed sensors in Hyundai Kia cars. You will find number 58900A7210 on the label, and the full set of numbers is given in the description below. According to the listing, the pump comes from the Hyundai Kia model.
Numbers to compare
The numbers as written on the labels and as a single string, the way catalogues list them:
- 58900-A7210 (catalogue format: 58900A7210), original Hyundai number,
- 58920-A7210 (catalogue format: 58920A7210), original Hyundai number,
- A7589-20550 (catalogue format: A758920550), additional number from the listing.
Compare the numbers with the original pump in your car, and if any of them differs, write to us before buying.
What ABS problems can point to
- the ABS stops working, although basic braking usually remains functional,
- the pump motor switches on at unusual moments or runs louder than usual,
- the ABS switches itself off shortly after the engine is started,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
It is worth reading the fault codes and checking the sensor wiring before replacement. Fitting and bleeding the brake system are usually carried out by a garage with the right equipment.
Questions and answers
| What is the difference between numbers 58900A7210 and 58920A7210? |
|---|
| The module carries several numbers, because it is identified both by the car brand and by the manufacturer of the block and control unit. When matching the part, compare all the numbers. |
| Where do I find number 58900A7210 on my pump? |
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Are the pump and the control unit sold separately? |
| In this listing they are a single module: a hydraulic block with the pump and valves, with the control unit attached to it. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.
