A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Hyundai Kia Mando 58500CZ100 BA60002310
Vendors's code: 58500-CZ100
Product code: 2FD4-4653A
Barcode:
Code 39:
ISBN:
£369.99
Price
£369.99
£455.09
Price
£455.09
Ask about the product
ABS pump Hyundai Kia Mando 58500CZ100 BA60002310
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to check whether ABS pump 58500CZ100 fits your Hyundai Kia
Used ABS pump with control unit, number 58500CZ100, inspected before sale. Matched by the numbers on the block and sticker.
How to identify ABS pump 58500CZ100 for your Hyundai Kia
This is a used original ABS pump with a control unit for Hyundai Kia cars: an aluminium hydraulic block with valves and a pump motor, with the electronics bolted to it. The main number is 58500CZ100, and the other numbers from the labels are listed below. According to the listing, the pump comes from the Hyundai Kia model.
Where to find the numbers on an ABS pump
You will find the numbers on the labels, while catalogues list them as a single string:
- 58500-CZ100 (catalogue format: 58500CZ100), original Hyundai number,
- BA60002310, additional number from the listing.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
What can point to an ABS pump failure
- the ABS warning light comes on after the engine is started and stays on,
- the brake pedal pulses or feels uneven for no obvious reason,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- the ABS warning light comes on together with the stability control warning light.
First check the wheel sensors, their wiring and the supply voltage. Only a fault code pointing to the module justifies replacing the pump. After fitting, clear the fault codes and, if necessary, bleed the brake system.
Questions and answers
| What is the difference between numbers 58500CZ100 and BA60002310? |
|---|
| The module carries several numbers, because it is identified both by the car brand and by the manufacturer of the block and control unit. When matching the part, compare all the numbers. |
| Where do I find number 58500CZ100 on my pump? |
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Who makes this module? |
| The module is made by Mando. The manufacturer's name does not change the numbers you should use to match the part. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.
