A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volkswagen Audi Seat Skoda ATE 5Q0614517J 10022002464 5Q0907379K 5Q0907379F 10091543363
Vendors's code: 10022002464
Product code: 9120-2985A
Barcode:
Code 39:
ISBN:
€284.55
Price
€284.55
€350.00
Price
€350.00
Ask about the product
ABS pump and control module Volkswagen Audi Seat Skoda ATE 5Q0614517J 10022002464 5Q0907379K 5Q0907379F 10091543363
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump 5Q0614517J with control module 5Q0907379K - is this your number?
We are offering a genuine, used and working ATE unit for Volkswagen, Audi, Seat and Skoda cars. The choice comes down to number 5Q0 614 517 J and the control module markings matching those on your part.
ATE ABS unit 5Q0614517J with ESC module 5Q0907379K
The control module of this unit constantly analyses the signals sent to it by the wheel speed sensors; if one wheel slows down more sharply than the others, it treats this as a sign of imminent lock-up. In response it operates the valves of block 5Q0614517J, and the pump rebuilds the fluid pressure. The label on this control module bears the words ‘Controller’ and ‘Steuergeraet ESC’ and two VAG numbers: 5Q0 907 379 K and 5Q0 907 379 F. A damaged wheel sensor triggers very similar messages, so before buying you need to establish which part has really failed.
Complete set of markings from both labels
- 5Q0614517J - VAG number of the ABS pump (hydraulic unit), on the label: 5Q0 614 517 J
- 10022002464 - ATE number of the hydraulic block (pump), written: 10.0220-0246.4
- 5Q0907379K - VAG number of the ABS/ESP control module, on the label: 5Q0 907 379 K
- 5Q0907379F - second VAG number on the control module label, written: 5Q0 907 379 F
- 10091543363 - ATE number from the control module label, written: 10.0915-4336.3
- 10062235271 - ATE number from the control module label, written: 10.0622-3527.1
- 28515400203 - ATE number from the control module label, written: 28.5154-0020.3
You will find the pump numbers on a white printed label with 2D codes on the pump motor housing. The second sticker, on the control module, contains two VAG numbers and three ATE numbers. We have ten other variants of this pump in the shop with a different ending to the number, so compare every character, right up to the final letter J.
When the control module or pump may be damaged
A problem with the ABS/ESC unit is usually indicated by:
- the ABS warning light showing while driving,
- a stored internal control module fault,
- no communication with the module on the diagnostic tool,
- a lit brake warning light.
Before ordering, read the stored faults and check the components that are easier to repair - the wheel speed sensors, fuses, wiring, connector and battery. After fitting, the unit requires the brakes to be bled; on VW Group cars the control module is normally coded with a diagnostic tool, and with ESP a basic setting of the ESP sensors, including the steering angle sensor, is sometimes needed as well.
Most common questions about 5Q0614517J
| Which cars is this unit suitable for? |
|---|
| The list of makes is Volkswagen, Audi, Seat and Skoda, but the fit is decided by the pump and control module numbers matching this listing. |
| Is the item in working order and does it come with a warranty? |
| Yes - it is a genuine part removed from a car, used and working. The warranty period is given in the product features table. |
| Which marking is key when choosing? |
| VAG pump number 5Q0 614 517 J together with its final letter, and secondly control module number 5Q0 907 379 K. |
| What do the ATE numbers on both labels tell me? |
| 10.0220-0246.4 is the designation the manufacturer gave the hydraulic block, while 10.0915-4336.3, 10.0622-3527.1 and 28.5154-0020.3 appear on the control module sticker. They are useful for identification when the VAG number is illegible. |
Send us photos of both stickers or your VIN, and we will compare the markings before you make your decision.
