A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Hyundai Mando 58920D7550 BE6008Y102
Vendors's code: BE6008Y102
Product code: 58920D7550
Barcode:
Code 39:
ISBN:
$249.54
Price
$249.54
$306.93
Price
$306.93
Ask about the product
ABS pump Hyundai Mando 58920D7550 BE6008Y102
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to check whether ABS pump 58920D7550 fits your Hyundai
Used original ABS module with number 58920D7550 for Hyundai. Confirm compatibility with the number from your original pump.
How to identify ABS pump 58920D7550 for your Hyundai
This is a used original ABS pump with a control unit for Hyundai cars: an aluminium hydraulic block with valves and a pump motor, with the electronics bolted to it. The main number is 58920D7550, and the other numbers from the labels are listed below. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Part number 58920D7550 and related numbers
The numbers as written on the labels and as a single string, the way catalogues list them:
- 58920D7550, original Hyundai number,
- BE6008Y102, additional number from the listing.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
What can point to an ABS pump failure
- the ABS warning light comes on after the engine is started and stays on,
- valve or pump motor faults are stored in the control unit memory,
- the ABS activates for no reason during normal braking,
- the ABS warning light comes on together with the stability control warning light.
Before buying a module, read the fault codes with a diagnostic tester. A faulty wheel speed sensor or its wiring can cause the same symptoms, and in that case replacing the pump will not help. After replacement the fault codes usually need to be cleared, and if the brake lines have been disconnected, the system must be bled.
Questions and answers
| Where do I find number 58920D7550 on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Do the brakes need bleeding after replacing the module? |
| If the brake lines are disconnected during fitting, the system must be bled. The fault codes in the control unit usually need to be cleared as well. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.
