A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Hyundai i30 589202L320 6158944200 2L58930200
Vendors's code: 6158944200
Product code: 589202L320
Barcode:
Code 39:
ISBN:
€243.90
Price
€243.90
€300.00
Price
€300.00
Ask about the product
ABS pump Hyundai i30 589202L320 6158944200 2L58930200
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Will ABS pump 589202L320 fit your Hyundai?
Used ABS pump with control unit, number 589202L320, inspected before sale. Matched by the numbers on the block and sticker.
How to identify ABS pump 589202L320 for your Hyundai i30
If the ABS warning light is on in your Hyundai i30, one possible cause is the hydraulic module or its control unit. ABS pump 589202L320 is a used original part, inspected before sale. According to the listing, the pump comes from the Hyundai i30 model.
Part number 589202L320 and related numbers
The numbers as written on the labels and as a single string, the way catalogues list them:
- 589202L320, original Hyundai number,
- 6158944200, additional number from the listing,
- 2L58930200, additional number from the listing.
Compare the numbers with the original pump in your car, and if any of them differs, write to us before buying.
What ABS problems can point to
- the ABS warning light comes on after the engine is started and stays on,
- valve or pump motor faults are stored in the control unit memory,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- the ABS switches itself off shortly after the engine is started.
First check the wheel sensors, their wiring and the supply voltage. Only a fault code pointing to the module justifies replacing the pump. After fitting, clear the fault codes and, if necessary, bleed the brake system.
Questions and answers
| Where do I find number 589202L320 on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Are the pump and the control unit sold separately? |
| In this listing they are a single module: a hydraulic block with the pump and valves, with the control unit attached to it. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| Is this a new part? |
| No. We sell used original modules, each one inspected before sale. You will find the warranty period in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.
