The engine control unit (often referred to as ECU or ECM) is the most important electronic module in every modern vehicle. It acts as the main computer managing the operation of the power unit, analyzing signals from numerous sensors in real-time. It is responsible for precise fuel dosing, ignition timing, boost pressure, and the operation of exhaust gas treatment systems. When this crucial component fails, normal operation of the car becomes impossible. When faced with electronic problems, many drivers consider complicated diagnostics, circuit testing, and attempting to repair integrated circuits. In practice, the fastest, safest, and most cost-effective solution is to replace the damaged component with a fully functional, original used part from the aftermarket.
ABS Pump Kia 58920A2210 A258920500
Vendors's code: A258920500
Product code: 58920A2210
Barcode:
Code 39:
ISBN:
£96.92
Price
£96.92
Regular price:
£96.92
0%
£119.21
Price
£119.21
Regular price:
£119.21
0%
Ask about the product
ABS Pump Kia 58920A2210 A258920500
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.84
-
shipping
(Poland)
from
£23.84
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS Pump A258920500 58920-A2210 for Kia
Complete ABS module for Kia with the numbers A258920500 and 58920-A2210 is an original part used for repairing the braking system.
KIA ABS Pump 58920A2210 / A258920500 – Frequently Asked Questions (FAQ)
1. Which models is the KIA ABS pump 58920A2210 and control module A258920500 designed for?
The ABS assembly marked with the numbers 58920A2210 and A258920500 was used in selected KIA models. Before purchasing, we recommend comparing the part number on the module currently installed in your vehicle. Matching the markings KIA 58920A2210 and A258920500 is the most reliable way to confirm compatibility.
2. What symptoms may indicate a faulty ABS module 58920A2210?
A faulty ABS pump or control module with the number 58920A2210 may cause the ABS warning light to come on, fault codes to be stored in the vehicle control unit, improper braking system operation or loss of communication with the module. During diagnostics, it is worth checking whether the vehicle is equipped with the A258920500 unit.
3. Do the numbers 58920A2210 and A258920500 refer to the same component?
Yes, in practice both markings can be found on the same assembly. The number 58920A2210 most commonly identifies the complete ABS pump, while A258920500 is used as a control module or component manufacturer's marking. When searching for the part, it is worth using both references.
4. Why is it important to check the ABS number before ordering?
Braking systems can differ even between similar versions of the same model. Checking the markings A258920500 and 58920A2210 helps reduce the risk of purchasing the wrong module. Comparing the numbers on the identification plate is more accurate than selecting a part based only on the model year or engine capacity.
5. Does the KIA ABS pump A258920500 require programming after installation?
The procedure for putting the module into operation depends on the specific vehicle configuration. In many cases, the A258920500 control module operates after correct installation and bleeding of the system, although some equipment versions may require diagnostic adaptation. Therefore, before installing the 58920A2210 part, it is worth checking the manufacturer's recommendations for the specific KIA model.
KIA ABS Pump 58920A2210 A258920500
The KIA ABS module with the numbers 58920A2210 and A258920500 is an important component of the safety system responsible for controlling brake operation during emergency braking. The part is searched for under both the marking KIA 58920A2210 and the number A258920500, so when selecting a replacement, it is worth paying attention to all markings on the housing.
If you are looking for the ABS control module A258920500 or the complete ABS pump 58920A2210, comparing the catalogue numbers is the best way to confirm compatibility. This helps avoid problems caused by differences between individual KIA vehicle versions.
Customers Also Viewed
-
Price £119.21Price £96.92
-
Price £99.34Price £80.76
