A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Peugeot 307 Bosch 0265225188 0265950084
Vendors's code: 0265950084
Product code: 0265225188
Barcode:
Code 39:
ISBN:
€81.30
Price
€81.30
€100.00
Price
€100.00
Ask about the product
ABS pump Peugeot 307 Bosch 0265225188 0265950084
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ABS pump 0265225188 come complete with the control unit?
ABS pump 0265225188 complete with control unit, used and inspected. Compare the numbers with the original in your car.
Peugeot 307 ABS pump 0265225188: hydraulic module with control unit
This module is made by Bosch. ABS pump 0265225188 is sold together with its control unit, just as it is fitted to Peugeot cars. According to the listing, the pump comes from the Peugeot 307 model.
Part number 0265225188 and related numbers
Below are the numbers as they appear on the labels, together with the single-string form used in catalogues:
- 0 265 225 188 (catalogue format: 0265225188), hydraulic block manufacturer's number,
- 0 265 950 084 (catalogue format: 0265950084), control unit number.
Check the numbers on your pump and compare them with those above. If any of them differs, contact us before ordering.
When an ABS module needs replacing
- the ABS stops working, although basic braking usually remains functional,
- the brake pedal pulses or feels uneven for no obvious reason,
- the ABS switches itself off shortly after the engine is started,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
First check the wheel sensors, their wiring and the supply voltage. Only a fault code pointing to the module justifies replacing the pump. After fitting, clear the fault codes and, if necessary, bleed the brake system.
Questions and answers
| What is the difference between numbers 0265225188 and 0265950084? |
|---|
| The module carries several numbers, because it is identified both by the car brand and by the manufacturer of the block and control unit. When matching the part, compare all the numbers. |
| Where do I find number 0265225188 on my pump? |
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Who makes this module? |
| The module is made by Bosch. The manufacturer's name does not change the numbers you should use to match the part. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.
Customers Also Viewed
-
Price €200.00Price €162.60
