A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Accelerator pedal potentiometer Chrysler 300 300C 04861716AA 6PV93390305
Vendors's code: 04861716AA
Product code: 453B-1411F
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this accelerator pedal potentiometer fit the Chrysler 300 300C?
This is a used, working accelerator pedal potentiometer for Chrysler 300 300C - numbers 04861716AA; 6PV 933 903-05 / 6PV93390305. Before buying, compare the numbers with the part in your car.
Accelerator pedal potentiometer Chrysler 300 300C
In the Chrysler 300 300C, engine 3.0, year 2007, the accelerator pedal potentiometer sends the signal to the engine control unit. We offer a used, working unit in good condition.
Numbers to compare
- 04861716AA - Chrysler number (OEM)
- 6PV 933 903-05 / 6PV93390305 - Hella number
- 3.0 - engine according to the offer
- 2007 - year according to the offer
Fitment
The offer states engine 3.0. Even so, compare the number 04861716AA with the number on your potentiometer, because different versions were fitted in the same models.
Symptoms of a faulty potentiometer
- the accelerator pedal "sticks" in some positions,
- a pedal signal correlation fault appears,
- power changes without any change in pedal pressure,
- the engine does not respond to the throttle right after starting.
Remember that in some cars the fault codes must be cleared or the pedal adapted after replacement - check this for your model.
Questions and answers
| Is the part new? |
|---|
| The potentiometer is used but working. The warranty is listed in the product attributes. |
| Is adaptation needed after replacement? |
| In some cars you need to clear the fault codes or adapt the pedal after replacement. This depends on the model and version, so check it before buying. |
Send a photo of your potentiometer or its number to contact@auto24parts.com and we will confirm whether this part fits.