A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Accelerator pedal potentiometer Ford Focus 4M519F836AH 1347104
Vendors's code: 4M519F836AH
Product code: 4M519F836AH
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an accelerator pedal potentiometer for the Ford Focus?
This is a used, working accelerator pedal potentiometer for Ford Focus - numbers 4M51-9F836-AH / 4M519F836AH; 1347104; 6PV 008641-01 / 6PV00864101. Before buying, compare the numbers with the part in your car.
Accelerator pedal potentiometer Ford Focus
This offer is for a used, working accelerator pedal potentiometer for the Ford Focus, year 2005-2007. The part is in good condition.
Numbers to compare
- 4M51-9F836-AH / 4M519F836AH - Ford number (OEM)
- 1347104 - additional part number
- 6PV 008641-01 / 6PV00864101 - Hella number
- 2005-2007 - year according to the offer
Fitment
Compare the number 4M519F836AH character by character with the label on your part and check that the connector and mounting points look the same.
Symptoms of a faulty potentiometer
- the engine jerks when accelerating,
- no response when the accelerator pedal is pressed,
- the ECU memory holds accelerator pedal fault codes,
- the revs jump although the pedal position does not change.
Before buying, read the ECU fault codes and make sure the cause is not the wiring or the throttle body; only then replace the potentiometer.
Questions and answers
| What should I check on delivery? |
|---|
| Check that the numbers on the part match the description and that the connector, housing and mountings show no visible damage. |
| Is the part new? |
| The potentiometer is used but working. The warranty is listed in the product attributes. |
| Can a potentiometer with a different number also fit? |
| Sometimes, but we do not assume that offers are interchangeable. Compare all numbers with your part or ask us. |
Send fitment questions to contact@auto24parts.com - give the model, year, engine and the number on the part.