A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Accelerator pedal potentiometer Ford Focus 4M519F836AK 6PV00864132
Vendors's code: 4M519F836AK
Product code: F1FB-465C5
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does part number 4M519F836AK fit your car?
This is a used, working accelerator pedal potentiometer for Ford Focus - numbers 4M51-9F836-AK / 4M519F836AK; 6PV 008 641-32 / 6PV00864132. Before buying, compare the numbers with the part in your car.
Accelerator pedal potentiometer Ford Focus
This offer is for a used, working accelerator pedal potentiometer for the Ford Focus, year 2008. The part is in good condition.
Numbers to compare
- 4M51-9F836-AK / 4M519F836AK - Ford number (OEM)
- 6PV 008 641-32 / 6PV00864132 - Hella number
- 2008 - year according to the offer
Fitment
We also offer other potentiometers for this model with different numbers. Choose by the number, not by the model alone.
Symptoms of a faulty potentiometer
- the pedal works only over part of its travel,
- the engine stalls when you release the throttle,
- the throttle response is uneven or jumpy,
- the ECU reports a potentiometer signal fault.
Remember that in some cars the fault codes must be cleared or the pedal adapted after replacement - check this for your model.
Questions and answers
| What does "used, working" mean? |
|---|
| We sell it as a used part that works and is in good condition; the warranty period is given in the product attributes. |
| Why is the number written in several ways? |
| The same number on the housing is written with spaces or as one string. We give both forms to make it easier to find. |
| Is adaptation needed after replacement? |
| In some cars you need to clear the fault codes or adapt the pedal after replacement. This depends on the model and version, so check it before buying. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right accelerator pedal potentiometer for your car.