A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Accelerator pedal potentiometer Opel Vectra B 24435990 0281002476
Vendors's code: 24435990
Product code: 190A-306D4
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an accelerator pedal potentiometer for the Opel Vectra B?
This is a used, working accelerator pedal potentiometer for Opel Vectra B - numbers 24 435 990 / 24435990; 0 281 002 476 / 0281002476. Before buying, compare the numbers with the part in your car.
Accelerator pedal potentiometer Opel Vectra B
The accelerator pedal potentiometer is a pedal position sensor that tells the engine control unit how hard you press the throttle. The unit offered comes from an Opel Vectra B and is used, working and in good condition.
Numbers to compare
- 24 435 990 / 24435990 - Opel / GM number (OEM)
- 0 281 002 476 / 0281002476 - Bosch number
Fitment
We also offer other potentiometers for this model with different numbers. Choose by the number, not by the model alone.
Symptoms of a faulty potentiometer
- the engine holds raised revs without touching the pedal,
- acceleration is sluggish,
- an engine fault message appears on the dashboard,
- the car runs only at emergency revs.
Remember that in some cars the fault codes must be cleared or the pedal adapted after replacement - check this for your model.
Questions and answers
| Is the part new? |
|---|
| The potentiometer is used but working. The warranty is listed in the product attributes. |
| What should I check on delivery? |
| Check that the numbers on the part match the description and that the connector, housing and mountings show no visible damage. |
| Do you also sell connectors or wires? |
| This offer covers the potentiometer only. You will find other items in other shop categories, or ask us about availability. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right accelerator pedal potentiometer for your car.