A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Accelerator pedal potentiometer Opel Vectra C Signum 9186724CE 6PV00832200
Vendors's code: 9186724CE
Product code: 9399
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Opel Vectra C Signum - what to check before buying?
This is a used, working accelerator pedal potentiometer for Opel Vectra C Signum - numbers 9186724 CE / 9186724CE; 6PV 008 322 00 / 6PV00832200. Before buying, compare the numbers with the part in your car.
Accelerator pedal potentiometer Opel Vectra C Signum
The accelerator pedal potentiometer is a pedal position sensor that tells the engine control unit how hard you press the throttle. The unit offered comes from an Opel Vectra C Signum, year 2008, and is used, working and in good condition.
Numbers to compare
- 9186724 CE / 9186724CE - manufacturer number
- 6PV 008 322 00 / 6PV00832200 - Hella number
- 2008 - year according to the offer
Fitment
Compare the number 9186724 CE in full with the number on your potentiometer. Different versions were fitted in the same models, so the number decides the fit, not the model alone.
Symptoms of a faulty potentiometer
- the accelerator pedal "sticks" in some positions,
- a pedal signal correlation fault appears,
- power changes without any change in pedal pressure,
- the engine does not respond to the throttle right after starting.
It is worth ruling out the connector, cable and sensor power supply first, because their faults cause symptoms similar to a faulty pedal potentiometer.
Questions and answers
| What does "used, working" mean? |
|---|
| We sell it as a used part that works and is in good condition; the warranty period is given in the product attributes. |
| How do I check that the potentiometer will fit my car? |
| Compare the model, year, engine and the numbers on the part fitted in your car with the numbers in the description. You can also send us a photo. |
| Where do I find the number on the potentiometer? |
| The number is on the housing of the potentiometer removed from the car. If you cannot read it, send us a photo. |
Send a photo of your potentiometer or its number to contact@auto24parts.com and we will confirm whether this part fits.