A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Accelerator pedal potentiometer Peugeot 1007 Bosch 0280752279 9647135280
Vendors's code: 0280752279
Product code: B898-387DE
Barcode:
Code 39:
ISBN:
227,64 zł
Price
227,64 zł
280,00 zł
Price
280,00 zł
In stock
Ask about the product
Accelerator pedal potentiometer Peugeot 1007 Bosch 0280752279 9647135280
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this accelerator pedal potentiometer fit the Peugeot 1007?
This is a used, working accelerator pedal potentiometer for Peugeot 1007 - numbers 0 280 752 279 / 0280752279; 9647135280. Before buying, compare the numbers with the part in your car.
Accelerator pedal potentiometer Peugeot 1007
This offer is for a used, working accelerator pedal potentiometer for the Peugeot 1007, year 2006. The part is in good condition.
Numbers to compare
- 0 280 752 279 / 0280752279 - Bosch number
- 9647135280 - additional part number
- Bosch - manufacturer
- 2006 - year according to the offer
Fitment
Compare the number 0 280 752 279 in full with the number on your potentiometer. Different versions were fitted in the same models, so the number decides the fit, not the model alone.
Symptoms of a faulty potentiometer
- the engine jerks when accelerating,
- no response when the accelerator pedal is pressed,
- the ECU memory holds accelerator pedal fault codes,
- the revs jump although the pedal position does not change.
Before buying, read the ECU fault codes and make sure the cause is not the wiring or the throttle body; only then replace the potentiometer.
Questions and answers
| What condition is this part in? |
|---|
| This is a used, working part in good condition; you will find the warranty period in the product attributes. |
| Where do I find the number on the potentiometer? |
| The number is on the housing of the potentiometer removed from the car. If you cannot read it, send us a photo. |
| Which number matters most when choosing the part? |
| It is best to compare all numbers on the part, above all the one marked as the manufacturer or OEM number. |
Write to contact@auto24parts.com with the model, year, engine and the number on your potentiometer - we will check the fit.
