A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Accelerator pedal potentiometer SsangYong 2.0 2055009001
Vendors's code: 2055009001
Product code: 2055009001
Barcode:
Code 39:
ISBN:
Ask about the product
Accelerator pedal potentiometer SsangYong 2.0 2055009001
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does part number 2055009001 fit your car?
This is a used, working accelerator pedal potentiometer for SsangYong - numbers 20550-09001 / 2055009001. Before buying, compare the numbers with the part in your car.
Accelerator pedal potentiometer SsangYong
The accelerator pedal potentiometer is a pedal position sensor that tells the engine control unit how hard you press the throttle. The unit offered comes from a SsangYong, engine 2.0, year 2007-2008, and is used, working and in good condition.
Numbers to compare
- 20550-09001 / 2055009001 - SsangYong (OEM) number
- 2.0 - engine according to the offer
- 2007-2008 - year according to the offer
Fitment
Compare the number 2055009001 character by character with the label on your part and check that the connector and mounting points look the same.
Symptoms of a faulty potentiometer
- the engine jerks when accelerating,
- no response when the accelerator pedal is pressed,
- the ECU memory holds accelerator pedal fault codes,
- the revs jump although the pedal position does not change.
If the symptoms appear only now and then, note the fault codes at the next diagnostic check - they help confirm that the potentiometer is the cause.
Questions and answers
| What should I check on delivery? |
|---|
| Check that the numbers on the part match the description and that the connector, housing and mountings show no visible damage. |
| Where do I find the number on the potentiometer? |
| The number is on the housing of the potentiometer removed from the car. If you cannot read it, send us a photo. |
| Why is the number written in several ways? |
| The same number on the housing is written with spaces or as one string. We give both forms to make it easier to find. |
Write to contact@auto24parts.com with the model, year, engine and the number on your potentiometer - we will check the fit.
