Is the BOSCH 0281017722 engine controller compatible with Audi A6 C7 3.0 TDI?
Yes, the Engine controller with BOSCH number 0281017722 and 4G0907401F is used, among others, in the Audi A6 C7 3.0 TDI (around 245 HP). It is an EDC17CP44 type unit responsible for the operation of the V6 diesel engine. The most important factor is full number matching – this ensures compatibility and correct performance.
Which models use ECU 4G0907401F EDC17CP44 in Audi 3.0 TDI?
The number 4G0907401F together with BOSCH 0281017722 appears mainly in Audi A6 and Audi A7 models with the 3.0 TDI V6 engine. It is especially found in the C7 generation (around 2010–2012), but similar controllers are also used in other VAG group vehicles with this engine.
Does the 0281017722 computer require programming after installation in Audi A6 or A7 3.0 TDI?
Yes, the EDC17CP44 Engine controller (0281017722 / 4G0907401F / 8K5907401A) usually requires programming after installation. This typically involves immobilizer adaptation or cloning data from the old ECU. In some cases, a plug&play solution is possible if the controller has been properly prepared beforehand.
How to check if ECU 4G0907401 or 8K5907401A will fit my Audi 3.0 TDI?
The best approach is to compare all markings: BOSCH 0281017722, 4G0907401F, 4G0907401 and 8K5907401A, as well as the controller type EDC17CP44. Additionally, it is recommended to check the VIN number or the designation of the old controller. This is the safest way to avoid mistakes when purchasing.
What distinguishes the BOSCH EDC17CP44 0281017722 engine controller in Audi 3.0 TDI?
The EDC17CP44 Engine controller is an advanced BOSCH unit used in 3.0 TDI V6 engines. It manages Common Rail injection, turbocharging, emissions, and overall engine performance. It is also widely used in chiptuning, as it allows significant increases in power and torque without mechanical modifications.
Flooded Automatic Transmission Control Module: Why Repair is a Waste of Money and How to Bring Your Car Back to Life as Quickly as Possible?
