The engine control unit (often referred to as ECU or ECM) is the most important electronic module in every modern vehicle. It acts as the main computer managing the operation of the power unit, analyzing signals from numerous sensors in real-time. It is responsible for precise fuel dosing, ignition timing, boost pressure, and the operation of exhaust gas treatment systems. When this crucial component fails, normal operation of the car becomes impossible. When faced with electronic problems, many drivers consider complicated diagnostics, circuit testing, and attempting to repair integrated circuits. In practice, the fastest, safest, and most cost-effective solution is to replace the damaged component with a fully functional, original used part from the aftermarket.
Engine control module Alfa Romeo MiTo 0261S07415 51896479 0261S07415
Vendors's code:
Product code: DB16-58219
Barcode:
Code 39:
ISBN:
1 300,81 zł
Price
1 300,81 zł
Regular price:
1 300,81 zł
0%
1 600,00 zł
Price
1 600,00 zł
Regular price:
1 600,00 zł
0%
In stock
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
Engine control module Alfa Romeo MiTo 0261S07415 51896479 0261S07415
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control module Alfa Romeo MiTo 0261S07415 51896479
The engine control module with part numbers 0261S07415 and 51896479 for Alfa Romeo MiTo is a proven replacement part, available in either locked or unlocked variants.
Does the engine control unit 0261S07415 fit Alfa Romeo MiTo?
The engine control unit with number 0261S07415, often also listed as 51896479, is used in the Alfa Romeo MiTo model. If your current ECU has one of these numbers, it indicates high compatibility and easy fitting.
What do the numbers 51896479 and 0261S07415 mean in the ECU?
The numbers 51896479 and 0261S07415 are manufacturer identifiers that allow precise identification of the engine control unit. They help avoid mistakes and ensure the correct part is chosen for your vehicle.
Does the 0261S07415 ECU require programming?
The 0261S07415 / 51896479 engine control unit may require adaptation to the vehicle. In our store, two variants are available: locked or unlocked ECU, so it is important to check the product description before purchase.
How to check if the 51896479 ECU fits my car?
The best method is to compare the number 51896479 or 0261S07415 with your current ECU. Matching numbers is the most reliable way to ensure the part fits your Alfa Romeo MiTo.
Why is the 0261S07415 number important when buying?
The 0261S07415 number uniquely identifies the ECU and prevents compatibility issues. Also note the number 51896479, often used interchangeably for the same part.
Is the 51896479 / 0261S07415 ECU ready to install?
It depends on the variant chosen. The ECU is available in locked or unlocked versions, so check which option suits your car before purchasing.
What are the symptoms of a faulty 0261S07415 ECU?
A faulty 0261S07415 engine control unit can cause starting problems, loss of diagnostic communication, errors, or irregular engine operation. In such cases, replacement is often necessary.
Does the 51896479 number appear under a different designation?
Yes, 51896479 often appears together with 0261S07415. Both numbers refer to the same ECU type, so check both when searching for a part.
What to check when buying the 0261S07415 or 51896479 ECU?
The most important is to match the part number (0261S07415 or 51896479), check the technical condition, and select the correct variant – locked or unlocked – to ensure easy installation and proper operation.
