A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Engine control unit MAN F2000 0281010019
Vendors's code: 0281010019
Product code: 74EB-26651
Barcode:
Code 39:
ISBN:
£401.64
Price
£401.64
£494.01
Price
£494.01
Ask about the product
Engine control unit MAN F2000 0281010019
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.80
-
shipping
(Poland)
from
£22.80
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this engine control unit fit the MAN F2000?
For sale: a used engine control unit for the MAN F2000 - numbers 0 281 010 019 / 0281010019, in working order and in good condition. Compare the numbers in the description with those in your car.
Engine control unit for MAN F2000
This engine control unit is intended for the MAN F2000. It is a used part, in working order and in good technical condition.
Part numbers in this listing
- 0 281 010 019 / 0281010019 - manufacturer's number (Bosch)
According to the listing data: MAN F2000 (model), Bosch (manufacturer).
How an engine control unit works
An engine control unit works in harsh conditions: changing temperatures, moisture and vibration. That is why it is worth checking the condition of the housing and connectors before buying.
Locked control unit
A locked control unit is sold with the previous vehicle's data - this is an option for workshops that can unlock and program it. We offer this control unit in the locked variant only - an unlocked variant cannot be selected in this listing; if you would like us to prepare it, ask us before buying. Whether the chosen method (PIN / CAR PASS, Virgin, IMMO OFF, programming, cloning) can be used depends on the specific control unit number, its software and the immobiliser. See our ECU preparation options and contact us before buying.
Matching by number
We have several control units for this model in our range, with different numbers. It is the number on the label that counts, not the model name alone. If in doubt, send us the number from the label or a photo of the module and we will check the fit before you buy.
Symptoms of a faulty control unit
- the engine warning light is on straight after the ignition is switched on,
- the diagnostic tester cannot connect to the control unit,
- engine speed is displayed incorrectly,
- the system works intermittently.
Bear in mind that after replacement the control unit may need coding or adaptation - check this for your model.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, in working order and in good condition. You will find the warranty period in the product features table. |
| How can I check whether the control unit will fit my car? |
| Compare the model, year, engine and the numbers on the control unit fitted in your car with the numbers in the description. You can also send us a photo. |
| Do you also sell wiring looms or other parts of the system? |
| This listing is for the control unit only. You will find additional components in other categories of our shop, or you can ask us about availability. |
Send a photo of your control unit or its number to contact@auto24parts.com and we will confirm whether this part will fit.
