A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Engine control unit MAN TGA TGL L2000 F2000 0281010347 L209Z24
Vendors's code: 0281010347
Product code: D11C-179B8
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose the right engine control unit for MAN TGA TGL L2000 F2000?
A used engine control unit in working order and in good condition for MAN TGA TGL L2000 F2000 - numbers 0 281 010 347 / 0281010347; L20 9Z24 / L209Z24. The numbers are listed below, and if you have any questions about the fit, write to us.
Engine control unit for MAN TGA TGL L2000 F2000
The engine control unit is the electronic 'brain' of the powertrain. This listing is for MAN TGA TGL L2000 F2000; the part is used, in working order and in good condition.
How this control unit is labelled
- 0 281 010 347 / 0281010347 - Bosch number (manufacturer)
- L20 9Z24 / L209Z24 - another part number
- 616-7146 / 6167146 - another part number
- 51116167146 - another part number
Vehicle data from the listing
- MAN TGA TGL L2000 F2000 - model
- Bosch - manufacturer
Locked control unit
A locked control unit keeps the previous car's data and immobiliser coding, so it is intended for garages that will unlock, program and match it to the vehicle themselves. We offer this control unit in the locked variant only - an unlocked variant cannot be selected in this listing; if you would like us to prepare it, ask us before buying. Whether the chosen method (PIN / CAR PASS, Virgin, IMMO OFF, programming, cloning) can be used depends on the specific control unit number, its software and the immobiliser. Before buying, send us the number of your control unit. More details: what locked and unlocked mean for an engine control unit.
The role of the control unit in the engine
The module contains memory with the software and engine data, and in some cars also the immobiliser data. That is why the software version matters alongside the part number. The module stores fault codes which, once a diagnostic tool is connected, help to establish whether the sensors, the wiring or the control unit itself is to blame.
How to match this part
Number 0 281 010 347 also appears in another listing. Compare all the numbers with the label on your control unit - we do not assume that different listings are interchangeable. Versions differ in areas such as engine power, gearbox and equipment, so even similar numbers do not always indicate the same module.
Symptoms of a faulty control unit
- random faults appear after water ingress or exposure to moisture,
- the radiator fan switches on for no reason,
- charging failure or voltage errors,
- the car stalls when coming to a stop.
Before you buy a control unit, check the fuses, power supply, earth and sensors - a damaged wiring loom or crankshaft position sensor can also cause similar symptoms.
Questions and answers
| What condition is this part in? |
|---|
| This is a used part in working order and in good condition. Warranty details are given in the features of this listing. |
| How can I check whether the control unit will fit my car? |
| Compare the model, year, engine and the numbers on the control unit fitted in your car with the numbers in the description. You can also send us a photo. |
| Where can I find the number on the control unit? |
| You will usually find the numbers on the label or the housing of the module, visible once it has been removed from the car. If you cannot read them, send us a photo. |
If you have any questions about the application, email contact@auto24parts.com and quote the number from the label.