A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Hyundai Mando 58920D7560 BE6009Y101
Vendors's code: BE6009Y101
Product code: 141C-23016
Barcode:
Code 39:
ISBN:
€243.90
Price
€243.90
€300.00
Price
€300.00
Ask about the product
ABS pump Hyundai Mando 58920D7560 BE6009Y101
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ABS pump 58920D7560 come complete with the control unit?
Used original ABS module with number 58920D7560 for Hyundai. Confirm compatibility with the number from your original pump.
Used Hyundai ABS pump with number 58920D7560
This is a used original ABS pump with a control unit for Hyundai cars: an aluminium hydraulic block with valves and a pump motor, with the electronics bolted to it. The main number is 58920D7560, and the other numbers from the labels are listed below. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Part number 58920D7560 and related numbers
You will find the numbers on the labels, while catalogues list them as a single string:
- 58920D7560, original Hyundai number,
- BE6009Y101, additional number from the listing.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
Symptoms of a faulty ABS pump or control unit
- the brake pedal pulses or feels uneven for no obvious reason,
- valve or pump motor faults are stored in the control unit memory,
- the pump motor switches on at unusual moments or runs louder than usual,
- the ABS switches itself off shortly after the engine is started.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| Where do I find number 58920D7560 on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| Who makes this module? |
| The module is made by Mando. The manufacturer's name does not change the numbers you should use to match the part. |
| What condition is this pump in? |
| It is a used original part, inspected before sale. You will find the warranty period in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.
