A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Injection pump control unit EDU Opel Astra Corsa Combo Meriva 1.7 DTI Isuzu 8971891363 Delphi 16267710
Vendors's code: 8971891363
Product code: 416C-53379
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do I check whether the EDU control unit 8971891363 will fit your Opel?
Used, working EDU injection pump control unit with Isuzu number 8971891363 and Delphi Delco number 16267710, for the Opel Astra, Corsa, Combo and Meriva with the 1.7 DTI engine. Compare the numbers with the label of the unit.
How to check whether the EDU control unit 8971891363 will fit your Opel
The EDU control unit with Isuzu number 8971891363 (Delphi Delco 16267710) comes from an Opel with the 1.7 DTI engine. In our shop it is matched to the Astra, Corsa, Combo and Meriva.
Numbers to compare
- 8971891363 - Isuzu number
- 16267710 - Delphi Delco number
You will find the numbers on the label of the control unit. Compare them in full with the label of your unit - the number decides the fitment, not the car model alone.
Questions and answers
| What details do I need to give to confirm the fitment? |
|---|
| A photo of the label of the fitted unit or the numbers copied from it is enough, together with the engine designation (1.7 DTI). |
| Does this control unit fit every 1.7 engine? |
| No. The listing is for the 1.7 DTI engine. You can check the engine designation in the registration document or on the plate in the engine bay. |
| Can I use a unit ending in 0, 1 or 2 instead of 3? |
| Do not assume so. The Isuzu numbers differ in the last digit, so confirm the fitment by the full number on the label. |
| What warranty does the control unit have? |
| It is a used part, working and in good condition. The warranty is 6 months. |
Need help comparing the numbers? Write to contact@auto24parts.com and give the number 8971891363 or 16267710 - we will check the fitment.