A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Refurbished engine control unit Peugeot Boxer, Fiat Ducato 2.2 HDI 9679061580 S180129001E
Vendors's code: S180129001
Product code: 3340-75470
Barcode:
Code 39:
ISBN:
£524.15
Price
£524.15
£644.71
Price
£644.71
Ask about the product
Refurbished engine control unit Peugeot Boxer, Fiat Ducato 2.2 HDI 9679061580 S180129001E
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
When is engine control unit 9679061580 the right choice for Peugeot Boxer, Fiat Ducato?
Refurbished Peugeot engine control unit with number 9679061580. Send us the numbers from the label on your control unit.
Where to find number 9679061580 on an engine control unit?
This is a refurbished engine control unit for Peugeot Boxer, Fiat Ducato. The main number is 9679061580, and whether the unit fits is decided by comparing all the numbers with the original part in your car. The listing indicates that the control unit was inspected before sale. The listing states that this control unit is for: Peugeot Boxer, Fiat Ducato. Engine given in the listing: 2.2 HDI. The listing also gives the markings Plug and Play, SID208. They help tell the control unit versions apart, but the full part number is what decides compatibility.
Part numbers for 9679061580
The numbers from the listing, as written on the labels and as a single string:
- 9679061580, car manufacturer's original number,
- S180129001E, control unit manufacturer's number.
Compare the numbers with the original control unit in your car, and if any of them differs, write to us before buying.
Control unit variant
This listing is for a control unit in the following variant(s): Refurbished / Plug and Play. We describe the differences between the variants (locked, unlocked, Virgin, IMMO OFF, Plug and Play, clone, full set) on the ECU preparation options page. Before buying, send us the numbers from the label and we will confirm which variant is available for that number.
The listing describes this control unit as refurbished, not new.
What can point to an engine control unit failure
- the engine warning light comes on and does not go out,
- the radiator fan or other electrical components do not work properly,
- starting is blocked by the immobiliser after the electronics have been replaced or repaired,
- the engine no longer runs properly after the battery has gone flat.
First check the battery, fuses and wiring, because a faulty control unit has to be distinguished from an ordinary fault in the electrical system. Fitting and configuration are best left to a garage with suitable equipment.
Questions and answers
| Are the make and model of the car enough to choose the part? |
|---|
| No. A single model comes with different versions of the control unit, depending on the engine, the software version and the equipment. The most reliable reference is the number on the original control unit. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the label on the original control unit, and we will help you check whether this part will fit. |
| Does this control unit fit the 2.2 HDI engine? |
| According to the listing it does, but confirm this with the numbers from the original control unit, because a single model comes with different versions. |
| Is this a new control unit? |
| No. It is a refurbished control unit, not a new part. According to the listing, it was inspected before sale, and you will find the warranty period in the product features table. |
Want to be certain? Send us the numbers from the housing of your control unit, and together we will check whether this part will fit.
