A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Suspension control module Citroen Jumpy WABCO 4461580010 1401155580
Vendors's code: 4461580010
Product code: BD4B-357C0
Barcode:
Code 39:
ISBN:
£153.78
Price
£153.78
£189.15
Price
£189.15
Ask about the product
Suspension control module Citroen Jumpy WABCO 4461580010 1401155580
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.70
-
shipping
(Poland)
from
£22.70
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose a suspension control module for the Citroen Jumpy?
This is a used, working suspension control module for the Citroen Jumpy, year 2008 - numbers 4461580010 / 446 158 001 0 / 1401155580 / 14011-555 80. Before buying, compare the numbers with the label on the control module in your car.
Suspension control module Citroen Jumpy
If the suspension in your Citroen Jumpy from 2008 reports faults, this listing may help. We sell a used, working control module in good condition.
Numbers to compare
- 4461580010 / 446 158 001 0 - WABCO number
- 1401155580 / 14011-555 80 - OEM number
Fitment
Number 4461580010 also appears in another listing with different OEM numbers. Compare all numbers with the label on your control module - we do not assume the listings are interchangeable.
Symptoms of a faulty suspension control module
- the suspension reacts late to a mode change,
- the vehicle changes height without being commanded,
- sensor faults appear although the sensors work,
- the control module cannot be diagnosed with a tester.
Before you buy a control module, check the fuses, power supply, earths and connectors - a faulty height sensor or compressor causes similar symptoms.
Questions and answers
| What condition is this control module in? |
|---|
| It is a used, working part in good condition. You will find the warranty period in the product features table. |
| Does the control module need coding after replacement? |
| Often yes - it depends on the make and version of the car. In many cars a replacement control module needs coding or adaptation with a tester in a workshop. |
Not sure? Write to contact@auto24parts.com and we will help you choose the control module for your car.
