᛫ E-mail:
contact@auto24parts.com
᛫ In English:
+48 792 797 344
+48 32 235 19 75
᛫ En Español
+34 637272785
᛫ Adress:
ul.Mikusińskiego 33
40-146 Katowice
Mon - Fri 9:00 - 17:00

With the rapid advancement of technology, there has been a sudden development of many sectors of the automotive industry. As the most relevant mechanical systems such as steering and suspension system and brake system have been equipped with state-of-the-art electronics, driving safety and ride quality have been significantly increased. In the case of a system failure, owing to the nowadays widespread use of a variety of sensors, modules and drivers, it is much easier to diagnose the source of a car problem and thus to repair it.
Ecu suspension
One of the best solutions is to use air suspension control modules. The main function of the control module is to gather entry data which is transmitted from the electronic control unit. The data is is then supplied together with an algorithm stored in the module's memory to the execution unit. Its main task is to efficiently control and supervise the data. The air suspension control module's responsibility is also to control the performance of the whole suspension system based on the provided algorithm. Any control module problems will result in the car's suspension system malfunctions which will further translate into deterioration of ride quality and driving comfort. Any disruptions associated with the automatic diagnostics function will affect the parameters of the default settings with regard to the check and diagnostic procedure which will further translate into incorrect performance of the execution system and module sensors. The received data is compared with the device memory-stored values and any possible deviations are characterised as system-performance failure. Once the error code has been registered, an appropriate control light goes on.
To diagnose a problem and find a solution you should go to a car repair shop which, with the help of specialist equipment, will able to read and detect the error codes. If one of the suspension drivers is confirmed to be damaged, you will need to have it replaced with a new or used one. The best solution is to purchase one of the new drivers from our online shop. However, it is also worth emphasising that not always the error code is triggered by a serious driver failure but it may also result from mistakes made during fitting.














