The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ECU Engine controller VOLKSWAGEN 0281016378 03L906022GH EDC17CP20
Vendors's code: 03L906022GH
Product code: 0281016378
Barcode:
Code 39:
ISBN:
€365.85
Price
€365.85
€450.00
Price
€450.00
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller VOLKSWAGEN 0281016378 03L906022GH EDC17CP20
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Original Volkswagen EDC17CP20 ECU engine controller with numbers 03L906022GH and 0281016378
Factory engine controller designed for Volkswagen vehicles, identified by its part numbers, allowing precise part matching and safe replacement.
Faq – Volkswagen ECU engine controller 0281016378 | 03L906022GH | EDC17CP20
1. Which vehicles is the 0281016378 / 03L906022GH EDC17CP20 engine controller suitable for?
The 0281016378 engine controller, also marked with the number 03L906022GH, is a Bosch controller from the EDC17CP20 family, used in selected Volkswagen models with TDI diesel engines. Before purchase, we recommend comparing all markings found on the controller label, as compatibility depends on the part number and the software version used by the manufacturer.
2. Does the number 03L906022GH have to be identical to my current engine controller?
The highest certainty of compatibility is achieved when the number 03L906022GH matches. In many cases, the number 0281016378 and the controller type EDC17CP20 are also important. If you are not sure, send us the VIN number or a photo of the identification label, and we will help verify compatibility before purchase.
3. What distinguishes the Bosch EDC17CP20 engine controller with numbers 0281016378 and 03L906022GH?
The Bosch EDC17CP20 controller is responsible for engine management, fuel injection control, turbocharger operation, exhaust emissions and many other parameters of the power unit. The markings 0281016378 and 03L906022GH make it easier to choose the correct module for a specific vehicle configuration.
4. How can I check if the 0281016378 engine controller is suitable for my car?
It is best to compare the numbers found on your current engine controller. If the label shows the markings 0281016378, 03L906022GH or the identical model EDC17CP20, the chance of correct matching is very high. In case of any doubts, it is worth contacting us before placing an order.
5. Why is it worth searching for the controller by the numbers 03L906022GH and 0281016378?
Searching by part numbers such as 03L906022GH or 0281016378 allows you to find the correct engine controller faster than relying only on the vehicle model. The manufacturer used different controller versions even in vehicles with the same engine, so selecting the part by its reference number is the safest solution.
