A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump BMW E90 E91 E92 Bosch 0265236008 6768550 0265950410
Vendors's code: 0265950410
Product code: 0265236008
Barcode:
Code 39:
ISBN:
€121.95
Price
€121.95
€150.00
Price
€150.00
Ask about the product
ABS pump BMW E90 E91 E92 Bosch 0265236008 6768550 0265950410
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to check whether ABS pump 0265236008 fits your BMW E90 E91 E92
Used original ABS module with number 0265236008 for BMW E90 E91 E92. Confirm compatibility with the number from your original pump.
Used BMW E90 E91 E92 ABS pump with number 0265236008
This is a used original ABS pump with a control unit for BMW E90 E91 E92 cars: an aluminium hydraulic block with valves and a pump motor, with the electronics bolted to it. The main number is 0265236008, and the other numbers from the labels are listed below. According to the listing, the pump comes from the BMW E90 E91 E92 model.
Numbers and markings on the ABS pump
You will find the numbers on the labels, while catalogues list them as a single string:
- 6768550, BMW number in short form, without the group prefix,
- 0 265 236 008 (catalogue format: 0265236008), hydraulic block manufacturer's number,
- 0 265 950 410 (catalogue format: 0265950410), control unit number.
Matching by number is more reliable than matching by car model. Compare all the numbers and ask us if any of them does not match.
What can point to an ABS pump failure
- the brake pedal pulses or feels uneven for no obvious reason,
- valve or pump motor faults are stored in the control unit memory,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- the ABS warning light comes on together with the stability control warning light.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| What is the difference between numbers 0265236008 and 6768550? |
|---|
| The module carries several numbers, because it is identified both by the car brand and by the manufacturer of the block and control unit. When matching the part, compare all the numbers. |
| Where do I find number 0265236008 on my pump? |
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Who makes this module? |
| The module is made by Bosch. The manufacturer's name does not change the numbers you should use to match the part. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.
