A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Fiesta Mazda 2S612M110CE D351437A0B
Vendors's code: 2S612M110CE
Product code: 10096001063
Barcode:
Code 39:
ISBN:
260,16 zł
Price
260,16 zł
320,00 zł
Price
320,00 zł
In stock
Ask about the product
ABS pump and control module Ford Fiesta Mazda 2S612M110CE D351437A0B
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Ford Fiesta Mazda?
This is a used, working ABS pump with control module for the Ford Fiesta Mazda - numbers 2S61-2M110-CE / 2S612M110CE; D351-437A0-B / D351437A0B. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Fiesta Mazda
For the Ford Fiesta Mazda (2002-2004) we offer a used ABS pump together with its control module, which you can match by the numbers in the list. It is working and in good condition.
Numbers to compare
- 2S61-2M110-CE / 2S612M110CE - part number (OEM)
- D351-437A0-B / D351437A0B - part number (OEM)
- 10.0206-0093.4 / 10020600934 - ABS pump number (ATE)
- 10.0960-0106.3 / 10096001063 - ABS control module number (ATE)
Application according to the listing
- Ford Fiesta Mazda - model
- 2002-2004 - year
- ATE - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
Compare number 2S61-2M110-CE in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model and year alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- a return pump fault is stored in the control module memory,
- ABS activates unnecessarily on a dry road surface,
- the ABS and ESP warning lights come on together,
- a pump supply voltage fault appears.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
Customers Also Viewed
-
Price 500,00 złPrice 406,50 zł
