A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Transit FK212C405AA 0265956396
Vendors's code: FK212C405AA
Product code: 0265956396
Barcode:
Code 39:
ISBN:
$207.95
Price
$207.95
$255.77
Price
$255.77
In stock
Ask about the product
ABS pump and control module Ford Transit FK212C405AA 0265956396
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.69
-
shipping
(Poland)
from
$30.69
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Ford Transit?
This is a used, working ABS pump with control module for the Ford Transit - numbers FK21-2C405-AA / FK212C405AA; 0 265 956 396 / 0265956396. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Transit
If the ABS warning light is on in your Ford Transit or the brake system reports faults, the pump with control module may be the cause. We sell a used, working unit in good condition.
Numbers to compare
- FK21-2C405-AA / FK212C405AA - part number (OEM)
- 0 265 956 396 / 0265956396 - ABS control module number (Bosch)
Application according to the listing
- Ford Transit - model
- Bosch - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The ABS pump is part of the safety system, so it is worth comparing the numbers carefully before buying. A mismatched version may not work with the car's sensors or wiring.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
Customers Also Viewed
-
Price $306.93Price $249.54
-
Price $179.04Price $145.56
-
Price $204.62Price $166.36
