The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ABS pump Mercedes Sprinter Crafter Bosch 0265244125 0265956033 A9069002302
Vendors's code: A9069002302
Product code: 0265244125
Barcode:
Code 39:
ISBN:
731,71 zł
Price
731,71 zł
900,00 zł
Price
900,00 zł
Ask about the product
ABS pump Mercedes Sprinter Crafter Bosch 0265244125 0265956033 A9069002302
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to check whether ABS pump 0265244125 fits your Mercedes Sprinter Crafter
Used ABS pump with control unit, number 0265244125, inspected before sale. Matched by the numbers on the block and sticker.
Is ABS pump 0265244125 the right part for your Mercedes?
The hydraulic block and control unit of this ABS pump form a single module that works with the wheel speed sensors in Mercedes Sprinter Crafter cars. You will find number 0265244125 on the label, and the full set of numbers is given in the description below. According to the listing, the pump comes from the Mercedes Sprinter Crafter model.
Part number 0265244125 and related numbers
You will find the numbers on the labels, while catalogues list them as a single string:
- 0 265 244 125 (catalogue format: 0265244125), hydraulic block manufacturer's number,
- 0 265 956 033 (catalogue format: 0265956033), control unit number,
- A 906 900 23 02 (catalogue format: A9069002302), Mercedes control unit number.
Check the numbers on your pump and compare them with those above. If any of them differs, contact us before ordering.
Symptoms of a faulty ABS pump or control unit
- the ABS warning light comes on after the engine is started and stays on,
- the pump motor switches on at unusual moments or runs louder than usual,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- the ABS switches itself off shortly after the engine is started.
First check the wheel sensors, their wiring and the supply voltage. Only a fault code pointing to the module justifies replacing the pump. After fitting, clear the fault codes and, if necessary, bleed the brake system.
Questions and answers
| Where do I find number 0265244125 on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Do the brakes need bleeding after replacing the module? |
| If the brake lines are disconnected during fitting, the system must be bled. The fault codes in the control unit usually need to be cleared as well. |
| Who makes this module? |
| The module is made by Bosch. The manufacturer's name does not change the numbers you should use to match the part. |
| What condition is this pump in? |
| It is a used original part, inspected before sale. You will find the warranty period in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.
